A Step-By-Step Guide To Building A Coke Can Stove For Camping

A Step-By-Step Guide To Building A Coke Can Stove For Camping

http://www.6decor.com/2017/02/a-step-by-step-guide-to-building-coke.html

 

Architecture & Design: A Step-By-Step Guide To Building A Coke Can Stove For Camping

How To Build a Coke Can Stove

Today I am going to show you how to make a "Jet Stove". A stove that can fit right into your pocket! The stove can be powered by hand.
There are a lot of details involved when you plan to camp or backpack in the winter.

Things You’ll Need:

  • Two Aluminum Soda Cans
  • One Marker
  • Scissors or a Cutter
  • One Nail
  • A Small Piece of Sandpaper
  • Alcohol and Fiberglass

Step 1: Cut Both Cans into Two Bottom Parts


Step 2: Create Small Holes at One of the Can Bottoms


Step 3: Make Another Central Hole

Make a bigger hole at the center of the pierced can’s bottom. This will become the main heating spot of your DIY stove.

Step 4: Polish it Up

 

Use the sandpaper to polish up all the rough edges in order to make the two can bottoms fit smoothly into one another. Now, nest the two halves together, top to bottom with a pierced half on top.

Step 5: Fill the Concave Cavity with Fue

 

Step 6: Light it Up

 

 

Voila! You now have a small, yet amazing, cooking stove made out of Coke can. You can use it for boiling water and very light cooking, or simply to keep the grounds warm and lit!










Architecture & Design

Share this

Related Posts

Previous
Next Post »